Trace Heavy Metals Research Articles

Comprehensive characterization of unscientifically disposed municipal solid waste (MSW) in Kashmir Region, India.

Unscientific dumping of municipal solid waste (MSW) is a common practice in Kashmir. To have an environmentally friendly and sustainable waste management system, MSW was collected from nine study locations of this region. They were air-dried, then oven-dried at 105°C for 24h, segregated, and characterized for various components. The overall average organic waste was > 55%, plastic waste about 17%, inert material about 10%, paper 9%, and cloth waste 7%. The calorific value of paper and plastic wastes exhibited was 4910kcal/kg, while organic waste had a calorific value of 1980kcal/kg. The proximate analysis showed that the moisture content ranged from 16 to 29%, volatile matter ranged from 49 to 72%, ash content ranged from 0.03 to 5%, and fixed carbon ranged from 5 to 20%. In S7, the volatile matter content recorded the lowest value at 49.15%, while in S5, the volatile matter content was notably higher at 71.84%, indicating easier ignition. Further, elemental analysis revealed that the major elements in MSW were carbon and oxygen, 53% and 37%, respectively, with small traces of heavy metals with an average of 0.02% cadmium (Cd) and 0.006% lead (Pb). Moreover, field emission scanning electron microscopy (FESEM) micrographs provided confirmation that the majority of components in the MSW exhibited either partial or complete degradation, resulting in a rough surface texture. In addition, the presence of silica and other silicate groups was also detected. Fourier transform infrared spectroscopy (FT-IR) analysis revealed that the main functional groups were alcohol. In the X-ray diffraction (XRD) analysis, all the major mineral phases were detected between 20 and 30° 2θ, except for the peaks at 50-60° 2θ in S3 and S9 where catalysts such as zeolite Y and zeolite X were detected. Overall, the MSW had low moisture content but higher calorific value, making it a viable feedstock.

Sensitivity and stability improvement on slippery surface-aggregated substrate for trace heavy metals detection using NELIBS

The sensitive and stable detection of trace heavy metals in liquid is crucial given its profound impact on various aspects of human life. Currently, nanoparticle-enhanced laser-induced breakdown spectroscopy (NELIBS) with dried droplet method (DDM) is widely applied for heavy metals detection. Nevertheless, the coffee ring effect (CRE) in DDM affects the stability, accuracy, and sensitivity of NELIBS. Here, we developed a slippery surface-aggregated substrate (SS substrate) to suppress the CRE and enrich analytes, and form a plasmonic platform for NELIBS detection. The SS substrate was prepared by infiltrating perfluorinated lubricant into the pores of PTFE membrane. The droplet, with targeted elements and gold nanoparticles, was dried on the SS substate to form the plasmonic platform for NELIBS analysis. Then, trace heavy metal elements copper (Cu) and manganese (Mn) were analyzed by NELIBS. The results of Cu (RSD = 5.60%, LoD = 3.72 μg/L) and Mn (RSD = 7.42%, LoD = 6.37 μg/L), illustrated the CRE suppression and analytes enrichment by the SS substrate. The results verified the realization of stable, accurate and sensitive NELIBS detection. And the LoDs succeeded to reach the standard limit of China (GB/T 14848-2017). Furthermore, the results for groundwater detection (relative error: 5.92% (Cu) and 4.74% (Mn)), comparing NELIBS and inductively coupled plasma mass spectrometry (ICP-MS), validated the feasibility of the SS substrate in practical applications. In summary, the SS substrate exhibits immense potential for practical application such as water quality detection and supervision.

A case-control study on asthma and obese patients: Influence of lifestyle patterns, serum trace elements, heavy metals, and total antioxidants

Background and aimAsthma is a chronic airway hyperresponsiveness disorder and Obese people have greater rates of asthma incidence and prevalence. Obesity, a complex condition, can cause nutritional metabolic problems that change trace elements and minerals. Trace element and antioxidant levels affect asthma aetiology. In this study, we aim to determine the serum levels of trace elements Zn, Fe, Cu, Mg, Co, Ni, Pb, Cd, and Cr, total antioxidants (TAS), and lifestyle that determine specific clinical conditions in asthma and obesity patients from Vellore City (Tamil Nadu, India). MethodsA case-control study to determine the level of the serum trace elements with 838 subjects (n = 242 asthma patients, n = 140 asthmatic obese, n = 185 obese patients, and n = 271 controls) between the ages of 20 and 60 years was carried out. Asthma was diagnosed based on the clinical examination and pulmonary function tests. Trace element levels were determined by atomic absorption spectrophotometry (AAS) in serum, and a DPPH-free radical scavenging assay was used to determine the total antioxidant capacity level in serum. ResultIn asthma male patients, serum levels of Zn, Fe, Cu, Mg, and TAS were significantly lower and Pb, Cd, and Cr significantly higher, whereas in female asthma patients, serum levels of Zn, Fe, Mg, and TAS were significantly lower and Pb significantly higher. In asthmatic obese male patients, Fe, Cu, and TAS were significantly lower, and Pb, Cd, and Co were significantly higher; in asthmatic obese female patients, Zn, Fe, Cu, Mg, and TAS were significantly lower, and Ni was significantly higher. In obese male patients, Zn, Fe, Cu, and TAS were significantly lower and Cd was significantly higher, and in obese female patients, Zn, Fe, Cu, Mg, and TAS were significantly lower. ConclusionThe influence of the level of trace elements, heavy metal, total antioxidant, and the lifestyle patterns, may increase the risk of asthma and obesity.

Carbons confined silver nanoclusters decorated carbon fiber electrodes toward electrochemical sensor of dihydroxyphenol and heavy metal ions

The development of electrochemical sensors based on noble metals has presented remarkable opportunities and challenges for the detection of trace phenols and heavy metal ions. However, the high costs of precious metals hinder the practical implementation of electrode materials. Enhancing the utilization efficiency of precious metals on the electrode surface is a crucial step toward improving electrochemical sensors based on these valuable materials. In this study, the morphology and utilization rate of silver nanoparticles were regulated by decorating nanofilms with different dimensions on carbon fiber electrodes. Specifically, the polypyrrole-derived carbon film coating enabled the material to have a large electroactive area and silver loading capacity. Simultaneously, the limiting effect of graphene quantum dots formed silver nanoparticles into silver clusters and achieved excellent electrochemical detection performance for dihydroxyphenol and heavy metal ions. Compared with silver nanoparticles, silver clusters provide higher electrocatalytic power and atomic utilization of silver. This study provides technical support for the trace analysis of environmental pollutants.

Nitrogen enrichment does not adversely affect exchangeable bases in rainfed urban arable soils of Kumasi, a tropical West African city

Urbanisation induces nitrogen (N) enrichment in tropical soils. This enhances soil acidification, leading in turn to a decrease in effective cation exchange capacity (CECe) and base saturation (BSe). Here, we investigated if and how these effects of urbanisation-induced N inputs affect the soils of tropical urban agroecosystems. Our aim was to quantify the impact of urbanisation intensity (UI) on total N (TN) contents and stocks, and to detect possible adverse N effects on soil pH, CECe, and exchangeable bases in rainfed urban arable soils of Kumasi, a tropical city in Ghana, West Africa. We analysed 618 topsoil samples (0–10 cm) from arable fields within the urban perimeter, categorised into four classes forming a gradient from low to high UI. For baseline comparison, 9 samples each from both rural arable fields and an urban forest were included. Urban arable soils generally had higher TN levels than their rural counterparts. Among the urban arable soils however, TN levels decreased with increasing UI, possibly as crop production and related N export through harvest intensified. Conversely, increasing UI correlated with increased levels of exchangeable Ca2+, K+, and Na+. No adverse N effect on soil pH, CECe, and BSe was detected. This could be explained with the strong TN-SOC relationship (R2 ≥ 0.9), and an increasingly strong relationship between exchangeable bases and TN and SOC (R2 = 0.5–0.8) with increasing UI. These relationships suggested a major common source of TN, SOC, and exchangeable bases. As the soils are neither chemically fertilised nor limed, these findings supported earlier studies that this source is provided by dumped biodegradable household waste, charred matter, ash, and construction materials. We concluded that soil N enrichment through these materials in Kumasi is accompanied by abundant bases in the same materials, which overcompensate any theoretic acidification. Our findings imply that not only can the fertility of tropical urban arable soils in cities like Kumasi be maintained, but also that the crops and ground water may not be at risk from the mobilisation of trace elements and heavy metals due to the hindered soil acidification.

Aminopoly(carboxylic acid)-Functionalized PolyHIPE Beads toward Eliminating Trace Heavy Metal Ions from Water.

Many advanced materials are designed for the removal of heavy metal ions from water. However, materials for eliminating trace heavy metal ions from wastewater to meet drinking water standards remain a major challenge. Herein, epoxy group-functionalized open-cellular beads are synthesized by UV polymerization of a water-in-oil-in-water system. The epoxy groups are further transformed into diethylenetriaminepentaacetic acid (DTPA) with hexamethylene diamine as a bridging agent. The resulting material (DTPA@polyHIPE beads) can eliminate trace Cu(II), Cr(III), Pb(II), Fe(III), or Cd(II) from water. When 0.15 g of DTPA@polyHIPE beads are used to adsorb metal ions of 20 mg in 100 mL of water, the residue concentrations of Cu(II), Cr(III), Pb(II), Fe(III), and Cd(II) are reduced to 0.08, 0.06, 0.02, 0.09, and 0.07 mg/L, respectively. The adsorption efficiencies of the beads for these ions are all higher than 99.55%. The adsorbent is durable and exhibits good recyclability by retaining an adsorption capacity of ≥91% after 5 cycles. The negative values of ΔG in the adsorption process indicate that the adsorption is feasible and spontaneous. The chemical adsorption follows the Freundlich adsorption model, indicating a multilayer heterogeneous adsorption. The DTPA@polyHIPE beads have a great potential application in dealing with trace heavy metal ion polluted water.

Proximate analysis, levels of trace heavy metals and associated human health risk assessments of Ethiopian white sugars

In this study, white sugar samples collected from five Ethiopian sugar manufacturing plants were analyzed for their proximate composition, and trace heavy metals level (Fe, Co, Ni, Mn, Zn, Cr, Cd, and Pb). Human health risk assessments associated with heavy metals exposure from white sugar ingestion were also assessed. Proximate analysis was conducted according to AOAC methods. For heavy metals determination, the sugar samples were digested using a mixture of HNO3, HClO4 and H2O2 (4:3:1) at 250 °C for 3 h prior to FAAS analysis. The measured mean values (%) of proximate parameters including moisture, ash, fiber, protein, fat and carbohydrate were found in the range of 0.07–0.61, 2.56–4.33, 0.06–0.24, 0.78–1.49, 1.16–1.89 and 92.13–95.03, respectively. The average concentration of heavy metals found in the sugar samples were ranged as 1.366–12.502, 0.107–0.268, 0.099–0.842, 0.458–1.000, 10.140–25.480, 0.053–0.322, 0.427–0.827 and 0.074–0.528 in mg/kg for Fe, Mn, Ni, Co, Zn, Cr, Cd and Pb, respectively. All the studied metals are below FAO/WHO permissible limit except Cd and Pb in Kessem, Fincha'a and Metahara samples. The target hazard quotient (THQ) and hazard index (HI) values are <1, indicating no non-carcinogenic risks of the heavy metals to an adult population via consumption of white sugar. However, the single element incremental lifetime cancer risk (ILCR) occurrence is probable from Ni for samples obtained from Kessem sugar factory (ILCR>1.0 × 10−4). The cumulative ILCR of heavy metals (Ni, Cr, Cd and Pb) resulting from consumption of white sugar by an adult person reveal a potential adverse cancer risk (ILCR>1.0 × 10−4) for all the studied samples except for sugar samples obtained from Wonji sugar factory. Therefore, continuous monitoring of these toxic metals should be made mainly by sugar industries and responsible government regulatory bodies to avert heavy metal toxicity associated with white sugar consumption in Ethiopia.

Rapid and sensitive in situ detection of heavy metals in fish using enhanced Raman spectroscopy

Heavy metals have been widely applied in industry, agriculture, and other fields because of their outstanding physics and chemistry properties. They are non-degradable even at low concentrations, causing irreversible harm to the human and other organisms. Therefore, it is of great significance to develop high accuracy and sensitivity as well as stable techniques for their detection. Raman scattering spectroscopy and atomic absorption spectrophotometer (AAS) were used parallelly to detect heavy metal ions such as Hg, Cd, and Pb of different concentrations in fish samples. The concentration of the heavy metals is varied from 5 ppb to 5 ppm. Despite the satisfactory recoveries of AAS, their drawbacks are imperative for an alternative technique. In Raman scattering spectroscopy, the intensities and areas of the characteristic peaks are increased with increasing the concentration of the heavy metals. For Hg concentration ≥ 1 ppm, a slight shift is observed in the peak position. The obtained values of peak intensity and peak area are modeled according to Elvoich, Pseudo-first order, Pseudo-second order, and asymptotic1 exponential model. The best modeling was obtained using the Elovich model followed by the asymptotic1 exponential model. The introduced Raman spectroscopy-based approach for on-site detection of trace heavy metal pollution in fish samples is rapid, low-cost, and simple to implement, increasing its visibility in food safety and industrial applications.

Characterizing hazardous substances of shale gas wastewater from the upper Yangtze River: A focus on heavy metals and organic compounds

In the last decade, rapid shale gas exploration in upper Yangtze River ecological zone in China has led to increasing concerns about the environmental impact of shale gas wastewater (SGW). However, our understanding of the types of potential hazardous substances of SGW remains limited. In this study, eight SGW samples from three shale gas regions in upper Yangtze River: the Sichuan Basin, the Guizhou Plateau, and the Three Gorges Area were collected, and their general water quality, trace metals, and organic compounds were comprehensively analyzed. Our in-depth analysis detected 55 kinds of trace heavy metals, with 24 exceeding detection limits. Most of them were of the concentration below 100 μg/L. Concentrations of primary pollutants, including Cd, Cr, As, Pb, and Ni, remained below Integrated Wastewater Discharge Standard (GB 8978–1996), indicating minimal environmental risk. The organic analysis identified 45 to 104 kinds of volatile and semi-volatile organic compounds in SGW samples from different regions. SGW samples from the Sichuan Basin exhibited a balanced proportion of aliphatic and aromatic compounds, with oxygen and nitrogen-substituted heteroatomic compounds prevailing, while SGW samples from the Guizhou Plateau and the Three Gorges Area were dominated by aromatic compounds, particularly hydrocarbons. Several organic substances exhibited high response strengths across multiple SGW samples, including isoquinoline, dibenzylamine, 2,4-di-tert-butylphenol, 1,2,3,4-tetrahydro-naphthalene, and 1,2,3,4-tetrahydro-6-methyl-naphthalene. The Globally Harmonized System (GHS) of Classification and Labelling of Chemicals classified most high-response organics as high acute and chronic aquatic hazards. Our findings indicate that high salinity and a variety of high-risk organic pollutants, rather than heavy metals, are the primary pollutants in SGW, underscoring the urgency of safety management of SGW.

Simultaneous electrochemical and colorimetric detection of tri-heavy metal ions in environmental water samples employing 3D-MOF/nickel selenide as a synergistic catalyst

The detrimental growth of water pollutants such as heavy metal ions (HMI) has become a life-threatening problem in the modern era. Therefore, developing more efficient strategies to detect such compounds requires increased attention. In this study, we designed a dual-mode assay for electrochemical sensing and naked-eye (colorimetric) detection of HMI using the peroxidase mimic activity of the developed nanozyme. The nanozyme of choice, which possesses both the necessary electrochemical properties and the ability to be oxidized with 3,3′,5,5′-tetramethylbenzidine (TMB), was determined and studied. Flower-like nickel selenide (NiSe) was integrated with a zeolitic imidazole framework (ZIF-67) to enable its wider applicability. HMI detection with a wide linear range of about 0.029–764.8 µM (Cd2+), 0.299–355.5 µM (Pb2+), and 0.29–153.2 µM (Hg2+) with NiSe/ZIF showed excellent electrochemical performances, while the linear range in colorimetric detection was about 0.199–429.9 µM (Cd2+), 0.199–90.8 µM (Pb2+), and 0.149–276.8 µM (Hg2+). The limit of detection for the simultaneous detection was 5.2 nM (Cd2+), 4.7 nM (Pb2+), and 6.2 nM (Hg2+) for electrochemical sensing. The LOD obtained for the colorimetric analyses were 0.043 µM (Cd2+), 0.050 µM (Pb2+), and 0.091 µM (Hg2+). The real sample analysis of the environmental water samples showed good results for trace heavy metal ions. Thus, the developed NiSe/ZIF catalyst is more effective with dual detection and can be used for portable analysis of several targets with further modifications.

Exposure to heavy metals and trace elements among pregnant women with twins: levels and association with twin growth discordance.

Twin growth discordance is one of the leading causes of perinatal mortality in twin pregnancies. Whether prenatal exposure to heavy metals and trace elements is associated with twin growth discordance has not been studied yet. To evaluate the prenatal level of heavy metals and trace elements in twin pregnancy and its relationship with twin growth discordance. This study involving 60 twin pairs and their mothers was conducted in Zhejiang Province, China, in 2020-2021. The concentration of heavy metals and trace elements in maternal blood, umbilical cord, and placenta were collected at delivery and measured by inductively coupled plasma tandem mass spectrometer. The association of prenatal level with twin growth discordance was evaluated using conditional logistic regression. High levels of heavy metal elements (thallium in maternal blood and umbilical cord blood of larger twins, vanadium in the placenta of larger twins) and trace elements (iodine in the placenta of larger twins) during pregnancy, as well as low levels of heavy metal elements (strontium in the umbilical cord blood of larger twins, strontium and chromium in the umbilical cord blood of smaller twins, strontium in the placenta of larger twins, molybdenum and lead in the placenta of smaller twins and difference of molybdenum in the placenta of twins), are associated with intertwin birthweight discordance. Univariate regression analyses showed a significant effect of gestational age at delivery and eleven trace element data on intertwin birthweight discordance. Multivariable logistic regression analysis with transformed variables as dichotomous risk factors combined with baseline demographic characteristics showed Tl in maternal blood as an independent risk factor. The model constructed by combining Tl in maternal blood (OR = 54.833, 95% CI, 3.839-83.156) with the gestational week (OR = 0.618, 95% CI, 0.463-0.824) had good predictive power for intertwin birthweight discordance (AUC = 0.871). The sensitivity analysis results indicate that the effect of maternal blood thallium on intertwin birthweight discordance is stable and reliable. To our knowledge, ours is the first case-control study to investigate the association between elevated maternal thallium levels before delivery and twin growth discordance.

Sub-ppb detection limit of Cr, Pb, and Cu in water by surface-enhanced LIBS with femtosecond laser

Water pollution caused by heavy metal contamination significantly threatens human health. Detecting trace levels of heavy metals in water is of utmost importance. Surface-enhanced laser-induced breakdown spectroscopy (SE-LIBS) has become a reliable detection method. In this study, we improved the analytical sensitivity of trace heavy metals in water by introducing femtosecond lasers into the SE-LIBS technique, replacing the traditional nanosecond lasers. An aluminum plate was utilized as a substrate to transform the liquid into a solid, overcoming the inadequacy in sensitivity and precision of LIBS when applied to water samples. We developed individual calibration curves for Cr, Pb, and Cu to determine their respective limit of detection (LOD). The LODs obtained were 0.3, 2.5, and 0.08 ng/mL for Cr, Pb, and Cu, respectively. These LODs were lower than traditional nanosecond SE-LIBS, and even lower than the LODs obtained by combining other LIBS enhancement techniques and SE-LIBS. We also determined good accuracy through the coefficient of determination R2, which was 0.97, 0.99, and 0.97, respectively, for Cr, Pb, and Cu. These results provide valuable and insightful information for the sensitive analysis of trace heavy metals in water using SE-LIBS with a femtosecond laser.

Application of Nitrogen-Doped Reduced Graphene Oxide-Persimmon Tannin Nanocomposites for Electrochemical Detection of Cd (II) in Water Resources

An ultrasensitive electrochemical biosensor for the detection of Cadmium (Cd(II)) was successfully constructed based on nitrogen-doped reduced graphene oxide-persimmon tannin (PT-N-RGO) nanocomposite and gold nanoparticles (Au NPs) modified screen-printed electrode (SPE). The structure and morphology of the prepared PT-N-RGO nanocomposite were characterized by ultraviolet-visible spectroscopy (UV–vis), fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). Each step for the electrochemical biosensor was characterized by cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). Au NPs, as modified electrode material, not only increased the effective surface area of the electrode, but also promoted the electron transfer during the redox reaction. The PT-N-RGO further increased the electron transfer rate, thereby improving the conductivity of the electrode and providing more binding sites for the subsequent capture of Cd (II). The biosensor showed good selectivity, stability and reproducibility for the determination of Cd (II). Also, the biosensor was applied to the analysis of real water samples and satisfactory results were obtained, which were verified by inductively coupled plasma mass spectrometry (ICP-MS). This study provided a new idea for the effective determination of trace heavy metals in the environment.

Smoke-water obtained via different biotics: a cost-effective and safer approach to biochemically sound banana ripening with prolonged shelf-life.

This study was conducted to investigate the efficacy of smoke-water obtained from biotics, for example coconut shells, rice husk, and pine cones on banana ripening, and compared with calcium carbide. Bio-chemical composition and remarkable bactericidal effect towards ATCC cultures of Escherichia coli, Staphylococcus aureus, and Bacillus cereus discovered the biological safety of the smoke-water in all collected smoke-water samples. Further, inductively coupled plasma mass spectrometry (ICP-MS) was carried out to investigate heavy metals; however, no traces were found in all collected samples. Consequently, it is proposed that heavy metal-free smoke-water obtained from various biotics series might be employed as ultrasafe fruit ripening as compared to calcium carbide (CaC2) that was found with heavy metal traces.

Characterization of halotolerant microalga isolated from waterlogged habitats: Deciphering the biochemical profiling and unraveling the molecular identity.

The primary objective of this study was to comprehensively explore the biochemical profile of the novel halotolerant microalgae strain, biogas laboratory scenedesmus (BGLRS), previously isolated from waterlogged regions in the southwest zone of Punjab, India. To achieve this, three distinct drying methods viz. freeze-drying, oven-drying, and shade-drying were employed and biochemical composition and antioxidant analyses on the microalgal biomass were conducted. Utilizing advanced analytical techniques, including high-performance liquid chromatography (HPLC), inductively coupled plasma-atomic emission spectroscopy (ICP-AES), and gas chromatography-mass spectroscopy (GC-MS) on freeze-dried biomass, its carbohydrate profile, micronutrient composition, and presence of bioactive compounds with potential therapeutic and nutraceutical significance were sought to unravel. Among the drying methods evaluated, freeze-drying exhibited the most promising experimental results, prompting its selection for further investigation. Notably, ICP-AES unveiled elevated concentrations of essential elements such as calcium, iron, magnesium, and phosphorus in BGLRS, with negligible traces of heavy metals, underscoring its safety for human consumption. GC-MS analysis further divulged the existence of numerous biologically active compounds, indicating potential applications in medical and nutraceutical fields. Through molecular identification using sequencing of the internal transcribed spacer (ITS) region, a close taxonomic resemblance between BGLRS and Scenedesmus sp. MKB was established, solidifying its unique position within the microalgal taxonomy. The deposition of ITS sequences into the NCBI GenBank, obtaining accession number MN796425, attests to the rigor and transparency of this research. Overall, these findings strongly suggest that microalgae BGLRS possesses high-quality biochemical attributes of significant therapeutic and nutraceutical importance.

Spectroscopic Analysis of Lipsticks for the Traces of Heavy Metals: A Comprehensive Review

Abstract: Heavy metal impurities are typically discovered in cosmetic products since they are abundant naturally. Lipstick's metal concentration has raised health concerns across the globe. This is so because applying cosmetics to the face always starts with lipstick. Since they are a potential source of daily, widespread, and frequently longterm exposure to a range of chemicals, the safety of cosmetic and personal care products has come under increased scrutiny in recent years. Hazardous heavy metals are included in cosmetics and other products in general, which can cause a multitude of health issues. Therefore, they ought to be kept to a minimum use wherever it is technically feasible. Analysing the levels of harmful heavy metals present in commercially available cosmetic products is important for reducing exposure to those substances. In this study, we investigated the levels of a few harmful heavy metals in lipsticks, such as lead, cadmium, nickel, arsenic, and chromium. For this purpose, we have studied around 50 research articles that explain the spectroscopic analysis of lipsticks for the traces of heavy metals. This article includes the determination of levels of these toxic heavy metals by Atomic Absorption Spectroscopy. Due to its hyphenated nature, low cost, quick analysis time, and reliable results, the atomic absorption spectroscopic (AAS) methodology is currently the one that is most frequently employed for metal ion detection despite the availability of a number of other methods.

The chemical composition, classification, and geographical distributions of soda-saline lakes in Eastern Tanzania's rift valley

Study regionSoda-Saline Lakes in eastern Tanzania's rift valley. Study focusThis study examined the chemical composition, classification, and geographical distribution of soda-saline lakes in the eastern Tanzania rift valley. New hydrological insight of the regionThe results revealed that lake water pH ranged from 9.0 to 10.2, EC ranged from 2843 to 109,800 µS/cm, and Na+ dominated over other cations with mixed dominance of HCO3- + CO32-, Cl-, and SO42-. The study also revealed that lakes Balangida and Balangida Lelu had higher sulphate levels than the other lakes, presumably due to sulfate-rich bedrock and local agricultural input. The study suggests that trace elements and heavy metals in lake water depend on their geology, past usage, and specific environmental conditions. The saturation index (SI) showed that the lakes were oversaturated with dolomite, calcite, and aragonite but undersaturated with anhydrite, gypsum, and halite. Lakes Natron and Manyara are classified as soda types, lakes Balangida and Eyasi are classified as soda-saline types; and lakes Singidani, Kindai, Mikuyu, Balangida Lalu, and Sulunga are classified as saline types. The geographical distribution patterns showed that soda-type and soda-saline lakes were most common in northern Tanzania (Arusha and Manyara). In contrast, saline-type lakes were common in the central regions between Dodoma and Singida. The dominant volcanic nature in the northern part possibly influences soda and soda-saline types.

Studies on adsorption properties of magnetic composite prepared by one-pot method for Cd(II), Pb(II), Hg(II), and As(III): Mechanism and practical application in food

A one-pot synthesis afforded a magnetic, crosslinked polymer adsorbent (m-P6) with a variety of functional groups to realize simultaneous adsorption of Cd2+, Pb2+, Hg2+, and As3+. The material was characterized by TEM-EDS, XRD, FT-IR, VSM, and XPS. Kinetic and isothermal analyses suggested mainly chemisorption processes of heavy metal ions that form multiple layers on heterogeneous surfaces. Theoretical adsorption capacities calculated by a pseudo-2nd-order kinetic model and the Sips isothermal model were 282.88 mg/g for Cd2+, 326.18 mg/g for Pb2+, 117.85 mg/g for Hg2+, and 320.29 mg/g for As3+. m-P6 not only can efficiently adsorb divalent heavy metals (Cd2+, Pb2+, Hg2+), but also demonstrate a process of adsorption-driven catalytic oxidation by single-electron transfer (SET) from As3+ to As5+. In application, in addition to adsorption in water, m-P6 is capable of minimizing matrix interference, and extracting trace heavy metals in a complex environment (cereal) through easy operations for improving the detection accuracy, as well as it is potential for application in detection of trace heavy metals in foodstuffs. m-P6 can be readily regenerated and efficiently recycled for 5 cycles using eluent E12 and dilute acid.

Determination of the Toxic Effects of Heavy Metals on the Morpho-Anatomical Responses of the Leaf of Typha latifolia as a Biomonitoring Tool.

Typha latifolia leaves act as sensitive barometers for trace heavy metal pollution, as revealed by their pronounced anatomical responses in a constructed wetland. Monthly water samples and Typha latifolia leaf tissue were collected over three consecutive months in 2018 from the Burgas Lake wetlands (Taoura), northeast Algeria. While physical and chemical parameters improved after treatment, atomic absorption spectrometry (Perkin Elmer A Analyst 800 AAS) detected persistent trace levels of cadmium, chromium, and lead in both the treated water and leaf tissue, highlighting the need for continued phytoremediation efforts. Microscopic examination of leaf tissue exposed to these metals revealed distinct anatomical adaptations, including shrunken vascular bundles, altered cell shapes, and stomatal closure. These findings underscore Typha latifolia's effectiveness in accumulating heavy metals and its potential as a highly sensitive biomonitor for persistent pollution in lake ecosystems.

Trace elements and heavy metals in black vultures (Coragyps atratus) and turkey vultures (Cathartes aura) in the southeastern United States.

Many vulture species worldwide are declining at alarming rates due to a variety of anthropogenic causes, including exposure to pollutants and pharmaceuticals through consumption of contaminated carrion. However, little is known about the extent to which vultures are exposed to various contaminants as well as toxicity thresholds for trace elements and heavy metals. Our objective was to quantify levels of trace elements and heavy metals within black vulture (Coragyps atratus) and turkey vulture (Cathartes aura) tissues to determine the extent to which populations in the Southeastern United States are exposed to carrion that contains high levels of contaminants. We collected 34 black vulture liver samples and examined differences in trace element and heavy metal concentrations between sexes and age classes (adult and juvenile). Further, we collected 81 blood and 42 feather samples from additional black and turkey vultures and compared differences between species and age classes. We found similar element concentrations between juvenile and adult black vultures with the exception of Cu, where levels were higher in juveniles compared to adults. However, we did observe substantial differences in element concentrations between species for both blood and feather samples, with black vultures generally having higher concentrations of most elements. Our data revealed higher element levels in both species compared to toxicity thresholds found in other bird of prey species, such as blood and liver toxicity threshold suggestions for Pb poisoning in Falconiformes. Further, while average contaminant levels were generally low, extreme outliers were observed for some elements, including Pb, suggesting some individuals were exposed to high levels of potentially toxic elements. More research is needed to better understand contaminant exposure in black and turkey vultures across a broader geographic region, as well as elucidate toxicity thresholds and non-lethal impacts of contaminant exposure in these species.